News Center_Tuoxuan Automobile Parts

Home page

Engine valve

2023-08-15

The engine valve is one of the important parts of the engine, and its function is to control the switch of the intake and exhaust valves. Its length is generally determined according to the design and requirements of the engine, and is usually determined by the engine manufacturer according to the actual situation.

Valve seat

2023-08-11

The valve seat is an important part in the engine, its function is to connect the valve and the valve seat, so that the valve can work normally. The valve seat ring has high wear resistance and high temperature resistance, can withstand high pressure impact and friction, ensures the sealing of the valve, and improves the efficiency and performance of the engine.

Valve guide

2023-08-14

The valve guide refers to the connecting pipe between the valve of the internal combustion engine and the cylinder head, and is mainly used to control the opening and closing of the valve. During the working process of the internal combustion engine, the valve guide bears important functions and roles.

Injector sleeve

Injector sleeve

2023-08-11

The injector copper sleeve is a key component for the injector. It is usually made of copper material, which has good thermal conductivity and corrosion resistance. The length of the copper sleeve of the fuel injector is very important, it directly affects the working effect and performance of the fuel injector. Generally, the length of the injector copper sleeve should be designed and manufactured according to the specific injector model and work requirements.

Copper sets

2023-08-17

Copper sleeve is a common mechanical part, which is widely used in various industrial fields, such as automobiles, mechanical equipment, power engineering, etc. It has excellent thermal conductivity, wear resistance and corrosion resistance, so in some special environments, copper sleeves are indispensable.

What is the function of the engine valve guide?

What is the function of the engine valve guide?

2023-08-17

The function of the engine valve guide is to guide the movement of the valve, ensure the reciprocating linear motion of the valve, make the valve and the valve seat fit correctly, and transfer the heat of the valve stem to the cylinder head. Due to the high working temperature and poor lubricity of the valve guide, cast iron or iron-based powder metallurgy materials with high graphite content are usually used to improve its self-lubricating performance. The installation method of the valve guide: the inner and outer cylindrical surfaces of the valve guide are processed and pressed into the valve guide hole of the cylinder head or cylinder block, and then the inner hole of the hinge is finished. To prevent axial rotation, snap ring retaining grooves are provided, which prevent the catheter from moving and falling into the barrel while working with the retaining snap ring. Normally, there is a slight gap between the valve stem and the valve guide so that the valve stem can move freely in the guide.

Injector sleeve

Injector sleeve

2023-08-17

The fuel injector sleeve is an accessory for the fuel injector, which plays the role of protecting and fixing the fuel injector. The fuel injector is a device used to inject fuel into the combustion chamber of the engine, which plays a key role in the working process of the engine. The length of the injector sleeve is 1000 words. The characteristics of this accessory and its function in the engine will be introduced in detail below.

Where are the car valves?

Where are the car valves?

2023-08-17

The car valve is located in the upper part of the engine, at the top of the cylinder combustion chamber. The throttle valve is a controllable valve that controls the air to enter the engine. After the gas enters the intake pipe, it will mix with gasoline to become a combustible mixture, which will be burned to form work. It connects the air filter on the top and the engine block on the bottom, which is called the throat of the car engine.

Differences between motorcycle engine valves

Differences between motorcycle engine valves

2023-08-17

The role of the valve is to input air into the engine and discharge the exhaust gas after combustion. The difference in the number of valves increases the rate of intake and exhaust, and enhances the performance of the engine.

Injector brass sleeve

Injector brass sleeve

2023-08-17

The injector copper sleeve is a component used for the injector, mainly made of copper. The length of the copper sleeve can be determined according to specific needs, and is generally a standard length.

< 1 >

CONTACT US

TEL:

+86 13563015608

Email:

Lin5201@Foxmail.com

Whatsapp:

+86 13563015608

WhatsApp

WeChat

GET A FREE QUOTE

Copyright : Liaocheng Tuoxuan Automobile Parts Co.,Ltd. Powerby : 300.cn jinan2 Seo Tags 【Business license】