Home page

Where are the car valves?

Release time:

2023-08-17

The car valve is located in the upper part of the engine, at the top of the cylinder combustion chamber. The throttle valve is a controllable valve that controls the air to enter the engine. After the gas enters the intake pipe, it will mix with gasoline to become a combustible mixture, which will be burned to form work. It connects the air filter on the top and the engine block on the bottom, which is called the throat of the car engine. The precautions for replacing the valve cover are as follows:

1. When changing, the contact surface should be completely cleaned. Glue it if you can, because it lasts longer after being glued, and it is also possible not to glue it, it depends entirely on the owner's wishes;

2. The engine must be completely cooled before it can be replaced;

3. When installing the valve cover, fasten it several times according to the diagonal. After fixing a screw, fix the screw at the opposite corner. Doing so will prevent uneven stress on the valve cover gasket.

Latest News

Engine valve

The engine valve is one of the important parts of the engine, and its function is to control the switch of the intake and exhaust valves. Its length is generally determined according to the design and requirements of the engine, and is usually determined by the engine manufacturer according to the actual situation.

2023-08-17

Valve seat

The valve seat is an important part in the engine, its function is to connect the valve and the valve seat, so that the valve can work normally. The valve seat ring has high wear resistance and high temperature resistance, can withstand high pressure impact and friction, ensures the sealing of the valve, and improves the efficiency and performance of the engine.

2023-08-17

Valve guide

The valve guide refers to the connecting pipe between the valve of the internal combustion engine and the cylinder head, and is mainly used to control the opening and closing of the valve. During the working process of the internal combustion engine, the valve guide bears important functions and roles.

2023-08-17

Injector sleeve

The injector copper sleeve is a key component for the injector. It is usually made of copper material, which has good thermal conductivity and corrosion resistance. The length of the copper sleeve of the fuel injector is very important, it directly affects the working effect and performance of the fuel injector. Generally, the length of the injector copper sleeve should be designed and manufactured according to the specific injector model and work requirements.